The Scorpion S-5030-220KV motor was specifically developed for F3A electric pattern aircraft, and is designed to run on 10 Li-Po cells with props in the 19 to 22 inch range. Everything possible has been done on this motor to get the most power at the lightest weight. The Front housing, Bearing Tube and flux ring have been made as light as possible, and a Titanium Main Shaft is used to save even more weight while maintain strength.

Scorpion Competition Series Brushless Motors are built from the best materials available, and are designed to provide both quality and performance at an affordable price. Scorpion starts with high quality aluminum alloy parts that are produced on the latest CNC milling machines. These parts are then gold Electro-Plated to provide a beautiful, long-lasting finish. The stators are made with 0.2mm laminations to give maximum efficiency, and minimum Eddy current losses. The stators are epoxy coated to prevent shorts, and are wound with wire that is rated at 180 degrees C (356 F). The magnets used in Scorpion Motors are rated for operation at 200 degrees C (392 F), making a motor that is virtually impossible to burn up in normal use.

Scorpion Motors are built to last, and are backed with a 2-Year warranty against defects in materials or workmanship. However, due to the high RPM of these motors, and the fact that we cannot control the installation and setup, the bearings are not covered by the 2-Year warranty, nor is any subsequent damage caused to the motor by a bearing failure. Bearings are a normal wear item, and as such, need to be maintained and changed periodically.

The Scorpion Motor Bearing Lubrication Kit is now available for maintaining the bearings in your motor. To view this product, please check out the Bearing Lubrication Kit.

For the best overall combination of quality, performance, and value, use Scorpion Motors in your planes.

Specifications

Stator Diameter ................................... 50 mm (1.968 in)
Stator Thickness .................................. 30 mm (1.024 in)
No. of Stator Arms .................................................... 12
Magnet Poles ............................................................ 14
Motor Wind ............................................... 16 Turn Delta
Motor Wire ....................................... 15-Strand 0.33 mm
Motor Kv ............................................. 220KV RPM / Volt
No-Load Current (Io/10V) .............................. 1.03 Amps
Motor Resistance (Rm) ................................ 0.027 Ohms
Max Continuous Current ................................... 70 Amps
Max Continuous Power .................................. 2590 Watts
Weight ......................................... 606 Grams (21.23 oz)
Outside Diameter ............................... 59.8 mm (2.35 in)
Shaft Diameter ................................. 7.98 mm (0.314 in)
Body Length ....................................... 60.9 mm (2.39 in)
Overall Shaft Length .......................... 118.6 mm (3.67 in)
Max Lipo Cell ........................................................... 10s
Shaft Material ................................................... Titanium