Innov8tiveDesigns.com My Account  Cart Contents  Checkout  
  Top » Catalog » Multi-Rotor » Multi-Rotor Combo Packages » NL-500HSPCC My Account  |  Cart Contents  |  Checkout   
     Categories
      Apparel
      Battery Balancers
      Battery Chargers
      Battery Meters
      Battery Straps
      BEC Circuits
      Brushless ESC's
      Brushless Motor Kits
      Brushless Motor Parts
      Brushless Motors
      Connectors
      Control Linkages
      Discounts and Close-outs
      Downloads & Software
      Ducted Fan Conversion Kits
      International Shipping
      LED Light Strips
      Li-Po Batteries
      Li-Po Charge Adapters
      Motor Bearing Oil
      Motor Mounting Screws
      Motor Mounts
      Multi-Rotor
          Multi-Rotor Combo Packages
          Multi-Rotor Frames & Frame Parts
          Multi-Rotor Flight Controllers
          Multi-Rotor ESC's
          Multi-Rotor Accessories
      Pinion Gears
      Prop Adapters
      Propellers
      Scorpion Promo Items
      Servo Extensions and Y's
      Servos and Accessories
      Spinners
     Manufacturers
What's New? more
Boscam FPV Combo Set + Goggles
Boscam FPV Combo Set + Goggles
$599.99
Quick Find
 
Advanced Search
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Contact Us
Next Level 500mm Hex, Standard Combo with Cobra Motors
[NL-500HSPCC]
$624.99

This Next Level 500mm Hex Rotor Combo Kit is the Standard power system featuring Cobra 2213/26 motors that is designed for pilots that simply want to sport fly their Quad-Rotor craft and possibly hang a GoPro camera on it some time in the future. For pilots that want to also use FPV gear or other additional options, you should use select the 500 Hex High Power Combo Kit that is also available on our sit.

This Combo Kit contains all of the parts needed to assemble the 500mm Hex Rotor frame, except for the battery, receiver and Flight Controller Board, which need to be purchased separately.

Included in this High Power Combo Kit are the following items:

1 - Next Level 500mm Hex Rotor Frame Kit
6 - Cobra 2213/26 Brushless Motors, 950 Kv
6 - Next Level 20 Amp Speed Controllers with SimonK Firmware
6 - Cobra 100mm Motor Lead Extension Kits
2 - GemFan 9x4.7 Green Multi-Rotor Props
2 - GemFan 9x4.7R Green Multi-Rotor Props
4 - GemFan 9x4.7 Black Multi-Rotor Props
4 - GemFan 9x4.7R Black Multi-Rotor Props
1-6 to 1 Power Harness


With a 3-cell Li-Po battery pack, at 11.1 volts under load, the Cobra 2213/26 motor turning GemFan 9x4.7 props will produce the following performance numbers at full throttle:

Amps - 9.2
Watts - 102
RPM - 8000
Thrust - 685 grams, 24.1 ounces
Pitch Speed - 35 MPH

Six of these motors together will produce a total of 4110 grams or 144.6 ounces of combined thrust at full throttle.

To maintain good maneuverability and performance, we recommend that the maximum flying weight of this setup should be no more than 60% of the total available thrust. For this power system, that would be 87 ounces maximum take-off weight.




Also included in the Combo Kit is a 6-to-1 Power Harness that allows you to run all 6 speed controllers from one battery. The power harness has a male Deans type power connector on one end, and a set of 6 3.5mm Male and Female bullet connectors at the other end. In addition to the bullet connectors, there is a male JST power connector for providing power to other items such as FPV gear or LED Nav lights.




This product was added to our catalog on Monday 02 July, 2012.
Reviews
Shopping Cart more
0 items
Manufacturer Info
Next Level
Other products
Notifications more
NotificationsNotify me of updates to Next Level 500mm Hex, Standard Combo with Cobra Motors
Tell A Friend
 
Tell someone you know about this product.
Reviews more
Write ReviewWrite a review on this product!

Copyright © 2013 Innov8tiveDesigns.com
Powered by osCommerce