Cobra Brushless Motors offer performance and value for Sport Flyers and Competition pilots alike. They are built from high quality components, and are designed to give years of top-level performance. All Cobra Motors are shipped in a custom designed package that features protective foam on all sides, with seperate compartments to protect the motor and accessory pack.

The Cobra 2204 series motors have a 3.0mm shaft for extra strength, as well as oversize ball bearings to support the shaft and provide a long life. The stators are made with 0.20mm laminations for maximum efficiency and minimum Eddy Current losses. Since these motors are typically soldered directly to the speed controller to save weight, the 2204 motors come without bullet connectors and feature pre-tinned motor leads. These motors also have a cross mount built right into the back plate for easy instalation on your model.

Included with every Cobra 2204 Series Motor is a complete accessory package which contains the following items:

● Four M2x8mm Motor Mount Screws
● O-ring prop adapter with 2 screws
● 20mm dia. x 2mm O-Ring


The O-Ring prop adapter is a reversible unit with a 5.5mm centering ring on one side to fit GWS Slow-Fly props, and a 7.0mm centering ring on the other side to fit GWS DD series props. With the proper center hole adapter ring, GWS Slow-Fly props and other brands will also fit perfectly on the prop adapter.



Click here for Cobra C-2204/32 Propeller Data Chart


Cobra C-2204/32 Motor Specifications

Stator Diameter ................................... 22.0 mm (0.866 in)
Stator Thickness .................................... 4.0 mm (0.157 in)
No. of Stator Arms ....................................................... 12
No. of Magnet Poles ...................................................... 14
Motor Wind .................................................. 32 Turn Delta
Motor Kv .................................................. 1960 RPM / Volt
No-Load Current (Io) .......................... 0.58 Amps @ 8 Volts
Motor Resistance (Rm) Per Phase ..................... 0.153 Ohms
Motor Resistance (Rm) Phase to Phase .............. 0.102 Ohms
Max Continuous Current ....................................... 12 Amps
Max Continuous Power on 2S Li-Po ........................ 90 Watts
Max Continuous Power on 3S Li-Po ...................... 130 Watts
Weight .............................................. 22.5 Grams (0.79 oz)
Outside Diameter .................................. 27.0 mm (1.063 in)
Shaft Diameter ..................................... 3.00 mm (0.118 in)
Body Length ......................................... 14.2 mm (0.559 in)
Overall Shaft Length ............................. 21.8 mm (0.858 in)








Items Included in Hardware Package





Cobra Motor Packaging