Cobra Brushless Motors offer performance and value for Sport Flyers and Competition pilots alike. They are built from high quality components, and are designed to give years of top-level performance. All Cobra Motors are shipped in a custom designed package that features protective foam on all six sides of the box, with 3 seperate compartments to protect the motor, accessory pack and cross mount.

The Cobra 2208 series motors have a 1/8 inch (3.17mm) shaft for extra strength, as well as oversize ball bearings to support the shaft and provide a long life. The stators are made with 0.20mm laminations for maximum efficiency and minimum Eddy Current losses. Also included on the motor are ultra-flexible motor leads with high-temp silicone rubber insulation and 3.5mm bullet connectors already installed.

Included with every Cobra Motor is a complete accessory package which contains the following items:

● Heavy Duty 3mm Thick Cross Style Motor Mount
● Four M3x6mm Motor Mount Screws
● Bolt-On style theaded prop adapter with 3 screws
● Retaining Collar with Set Screw
● Three female 3.5mm bullet connectors
● Three pieces of heat-shrink tubing


Click here for Cobra C-2208/20 Propeller Data Chart


Cobra C-2208/20 Motor Specifications

Stator Diameter ................................... 22.0 mm (0.866 in)
Stator Thickness .................................... 8.0 mm (0.315 in)
No. of Stator Arms ....................................................... 12
No. of Magnet Poles ...................................................... 14
Motor Wind .................................................. 20 Turn Delta
Motor Kv .................................................. 2000 RPM / Volt
No-Load Current (Io) .......................... 0.80 Amps @ 8 Volts
Motor Resistance (Rm) Per Phase ..................... 0.096 Ohms
Motor Resistance (Rm) Phase to Phase ............. 0.064 Ohms
Max Continuous Current ...................................... 18 Amps
Max Continuous Power on 3S Li-Po ...................... 200 Watts
Weight .............................................. 46.5 Grams (1.64 oz)
Outside Diameter .................................. 27.7 mm (1.091 in)
Shaft Diameter ..................................... 3.17 mm (0.125 in)
Body Length ......................................... 24.0 mm (0.945 in)
Overall Shaft Length .............................. 38.0 mm (1.496 in)



Items Included in Hardware Package





Cobra Motor Packaging