Normal Retail Price $34.99, 30% Off SALE Price $24.49

The T-Motor series of brushless motors are designed by F3P flyers, for F3P flyers! These great little motors feature ball bearing supported main shafts with a built-in cross-style backplate mount, and the T2212 model features a 3.0mm main shaft that can be used with a collet style prop adapter or the included prop-saver type propeller mounting system. These motors are great for smaller RC aircraft that need a powerful, dependable and light weight power source.

The T2212 motor is designed to run on 2-cell or 3-cell Li-Po power, and in addition to powering F3P type models, it makes an excellent brushless upgrade replacement motor for many of the small ready-to-fly models that come stock with brushed motors and gearboxes.

The T2212 motor comes with with a set of 3.5mm male bullet connectors already soldered to the motor leads, and includes a matching set of 3.5mm female bullet connectors for your speed controller, along with 3 pieces of heat shrink tubing to cover them. Also included with the motor is a set of four 2.0mm mounting screws and 2 O-Rings to hold your propeller onto the motor.

The T2212 motor comes with a prop saver adapter that fits over the 3.0mm main shaft. To allow several different sizes of props to be used, the reversable Prop Saver has a centering ring on one side that is 7.0mm in diameter, and is designed to fit the hole in the center of the GWS Direct-Drive style propellers. The centering ring on the opposite side is 5.5mm in diameter, and is designed to fit the GWS Slow-Fly style props.

Every T-Motor come packaged as shown below in an attractive wooden box that features a black pebble finish exterior. On the inside of the box, a custom die-cut foam insert is used to protect the motor and accessories during shipping.

The recommended propeller for the T2212 when running on 2 Li-Po cells is the GWS 10x6DD. With this prop, you will get 550 grams of thrust with a current draw of 12.7 amps at 7.0 volts. On 8.0 volts, you will get 660 grams of thrust with a current draw of 15.1 amps.


Motor Specifications

Stator Diameter ............................ 22.0 mm (0.866 in)
Stator Thickness ........................... 12.0 mm (0.472 in)
No. of Stator Arms ................................................. 12
No. of Magnet Poles ............................................... 14
Motor Kv Value ................................... 1300 RPM / Volt
No-Load Current (Io) ................. 1.0 Amps @ 7.0 Volts
Motor Resistance (Rm) ............................... 79 mOhms
Max Burst Current (10 Sec.) .......................... 20 Amps
Max Continuous Power ................................ 180 Watts
Motor Weight ................................. 52 Grams (01.83 oz)
Outside Diameter ........................... 27.8 mm (1.094 in)
Shaft Diameter ................................ 3.0 mm (0.059 in)
Body Length .................................... 22 mm (0.866 in)
Overall Motor Length ...................... 34.6 mm (1.362 in)



Click here to download a Copy of the T2212 Motor Drawing.